For Mid-Volume Level Production
The semi-automatic AccuSerter 2 machine is the newest addition to the Tyco Electronics line of Pin Insertion Systems. Designed and manufactured with a focus on mid-volume level production, the AccuSerter 2 provides a broad range of features at a competitive price.
The Accuserter 2 can apply products from Tyco Electronics and other manufacturers providing the flexibility to address both current and future tooling needs.
Easy Operation
The AccuSerter 2 machine uses a pneumatic power unit together with product specific 'quick change' tooling packs. The insertion heads can be equipped with a rotary insertion finger that can apply products at different angles without decreasing the insertion rate. The tooling packs can be exchanged within 30 minutes
to meet your full range of application requirements.
The lower support tool is equipped with an electrical continuity or pin penetration check to assure that each product was correctly inserted into the PCB and remained there in real time. There is no additional quality check required and all QC data can be stored via the system PC for 100% future traceability.
The AccuSerter 2 machine can be equipped with 2 insertion heads to double the number of products that can be applied in a single machine.
The operator interface is an easy to use touch-screen which allows simple programming and automatic setup.
Product Features
- Board capacity of 305 x 450mm [12 x 18”].
- Wide range of tooling packs for Tyco Electronics and non-Tyco Electronics products available.
- X/Y-Table with stepper motors.
- 'Quick change' tooling packs allow easy and fast setup.
- Database driven software for simple programming and automatic setup.
- Easy-to-use operator interface.
- Please note: the AccuSerter 2 is NOT CE Approved at this time.
Technical Features
- Power: 110/230 V, 50/60 Hz.
- Compressed air supply: 600 kPa.
- Noise pressure level: <75 dB(A).
- Repeatability: ± 0.02mm.
- Insertion rate: up to 120 pins per minute.
- PC based control with touch-screen as Operator Interface.
- Dimensions: 1,054 x 1,450 x 1,775mm, [41.5 x 57 x 70"],
(D x W x H)
- Weight: approx. 552 kg [1,151 lb].
Products which can be processed
- ACTION PIN contacts
- AMPMODU 1 sockets
- AMPMODU II sockets
- Junior Timer with ACTION PIN contacts
- Flat solder tabs
- FFC contacts
- EON contacts
- Other contacts including non-TE terminals available upon request
